If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Typical problem in this model. If you have a good drum, replace the power supply (40X5362)
If you have electronic skills, I can indicate which element in the power supply could be damaged.
In this model there is no separate HVPS, High voltage circuit is integrated with LVPS. Those two little transistors marked on the picture are damaged very often. Result of the damage is high voltage on the drum and completely black pages.
Comment