LEXMARK E342n RESET TONER

[KHAN]

Hi,
I want to reset the toner cartridge wiht out changing the CHIP, if it is possible HOW can I ? or somebody knows about other LEXMARK model that can be resettable with out changing the CHIP, PLEASE i need help.
THANKS.

[Hank]

LEXMARK E342n RESET TONER

Except for reset of OPC counters in some models (E/X 342, E120,etc) there are no tricks available for Toner cartridges but to change chips.

[KHAN]

Gracies,ok how can i reset the DRUM COUNTER please let me known?
THANKS

[Jantje]

reset PC count

1. Turn off the printer.
2. Press and hold

Select and Return.
3. Turn on the printer.
4. Release the buttons when Performing Self Test displays.
The message CONFIG MENU displays on the top line of the operator
panel.

Reset PC Cnt

When you install a new photoconductor, this number should be reset.
To reset the counter:
1. Select

Reset PC Cnt from the CONFIG MENU.
2. Press Select to reset the counter to zero.

Note: Permanent page count is not affected by this operation.

[Hank]

Resetting OPC unit counter in Lexmark E120

E340/E342 Drum Units
Reset OPC counter .
Printer Off, with the printer still off,press and hold the "Select" and "Return" buttons. While still holding the buttons down, turn the printer back On. Keep holding them down until the screen shows PERFORMING SELF TEST or CONFIG MENU. Release buttons when either of these messages are displayed. Press the left or right arrow buttons until RESET PC CNT appears on display. Press the "Select" button. When the display shows CONFIG MENU again, turn the printer Off. Wait 5 seconds and turn the printer back on (Do not hold any buttons down this time). The counter is reset.

This a liitle more detailed than the prior ones but following this instructions produced by my friend M.Josiah will keep you from getting frustrated.

[sapko]

Please,
How reset chip on toner Lexmark E120?

Thanks