lexmark X940 copier

[knight]

hi
this is my first login in the forum i have problem with x940 that i replaced transfer belt but it still gave me the error code 904.00 can some one look at this plz
thanks

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


Paul@justmanuals.com

[mojorolla]

904.00 is an error involving the home position sensor not being read. You can also get this error if the cleaner unit is not installed or missing. If it fails more than 3 times, it has to be reset in diagnostic mode by selecting Trans Belt fail HP.