If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does anyone know how to get into the Lexmark t642 diagnostics and service modes. In particular I need to know how to reset the maintenance counter and how to turn off Auto Tray Size Sensing.
Hold down select and return whilst powering on machine, hold until self test comes up on display then press go, this will get you into service mode. The issue with the tray, maybe just use normal print setting menu.
Comment