Lexmark/Micron ST 9120

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kurt
    Technician

    50+ Posts
    • May 2007
    • 56

    #1

    Lexmark/Micron ST 9120

    The St 9120 looks like a Lexmark. It is used to print checks. Does anyone know it's cross reference to the lexmark. It needs a new fuser and just wondering if I can put in a Lexmark and still work ok. Thanks, kurt
  • CanonHPTech
    Trusted Tech

    100+ Posts
    • Apr 2007
    • 235

    #2
    Not sure where the Micron came from but the companies name is Source Technologies: they re-badge IBM and Lexmark printers and make them MICR to print checks. Very similar to Troy who uses HP printers. Should crossover to a Lexmark T520 T522, fuser should be 99A2423. Would also change the yellow pick tires also 99A0070. Maintenance Kit includes these with the Fuser, but have seen very few of these or the older Optra's actually make it to a Maint interval without needing several overhauls. Oh, the answer is yes, because Source does not sell parts for there machines so should work fine, however I believe you can attempt to be a repair/service center for them, check them out at: www.https://www.sourcetech.com. Good luck sir, let us know if you are sucessful.
    The glass maybe half full, but less is more...
    Printer + Fax + Copier = Jack Of Many Trades,
    but Master Of None
    Color Copier = Not A Color Printer
    InkJet MFP = Not A Fax Machine
    B/W Copier = Not A Press
    Finisher = Deal Closer (salesman, not accessory)
    Copier Tech = Admin's Stress Ball (Scapegoat)

    Comment

    • Kurt
      Technician

      50+ Posts
      • May 2007
      • 56

      #3
      Originally posted by CanonHPTech
      Not sure where the Micron came from but the companies name is Source Technologies: they re-badge IBM and Lexmark printers and make them MICR to print checks. Very similar to Troy who uses HP printers. Should crossover to a Lexmark T520 T522, fuser should be 99A2423. Would also change the yellow pick tires also 99A0070. Maintenance Kit includes these with the Fuser, but have seen very few of these or the older Optra's actually make it to a Maint interval without needing several overhauls. Oh, the answer is yes, because Source does not sell parts for there machines so should work fine, however I believe you can attempt to be a repair/service center for them, check them out at: www.https://www.sourcetech.com. Good luck sir, let us know if you are sucessful.
      That did the trick.....thanks for your help....running like a champ again.....thanks, Kurt

      Comment

      Working...