hoping somebody may have seen this before I pitch it in the trash... ONLY on duplex print jobs, and the same way every time, the last page of the job ccomes out to the exit tray to be reversed bacck for printing the 2nd side, it comes completely out on the exit tray, there is another sheet (blank) with about 1-2" coming out of exit rollers, and a blank sheet undrer the drum, with just the lead edge in the fuser nip. Again only on duplex jobs, and only on the last sheet. Machine is clean, new feed rollers, have swapped drum and toner carts just to see. Single side jobs run perfectly all day. Hytech and Partsnow tech support no help on this one. Any suggestions? Thanks, Dave.
-
GO TIGERS!!
-
Re: Lexmark E260dn jamming
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com -
Re: Lexmark E260dn jamming
Thanks, Paul.
I thought I checked your site and didn't see it. I'll head there now.
DaveGO TIGERS!!
Comment
-
Re: Lexmark E260dn jamming
Check paper feed clutchComment
Comment