T640 no display

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • canonclc
    Technician

    50+ Posts
    • Apr 2010
    • 71

    #1

    [Electrical] T640 no display

    Hi have a t640 with no characters on the display
    although the display is back lit ok and it prints fine
    any ideas ?
    thanks in advance
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9919

    #2
    Re: T640 no display

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • MR Bill
      Senior Tech

      500+ Posts
      • Jan 2010
      • 532

      #3
      Re: T640 no display

      I have had the desplay go bad on some of the other Lexmark printers. S series. I would just replace it. You can get used ones from some of the venders out there. Parts Now, Liberty. ? Not to expensive.

      Comment

      Working...