Lexmark x945e, display has no lights/image on touch display. Reset machine and it sounds as if it is going through warmup, fans, fuser feels as if it gets to temp. Document feeder and finisher cycle when covers are opened and closed as in normal operations. The upper right light on the keyboard blinks green (this is the light next to the #3), Network print does not print, shows no error to used for failed to print. any ideas??
-
-
Re: Lexmark x945e No display
Unplug network cable. Then turn off/on.The chance that higher life forms might have emerged in this way is comparable to the chance that a tornado sweeping through a junkyard might assemble a Boeing 747 from the materials therein. -Fred Hoyle -
Re: Lexmark x945e No display
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comComment
Comment