lexmarkT642 dead

[krm]

Hi,
replaced the fuser and about 5 hours later the printer went dead. Fuses on LVPS are good, no change with original fuser, any ideas?
thanks in advance.

[JustManuals]

Re: lexmarkT642 dead

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Bantams]

Re: lexmarkT642 dead

Next time get a Epson lol

[Silvertoast]

Re: lexmarkT642 dead

some of the lexmark fusers are shipped set on the 220v setting. u have to switch it over to 110 or u will get error codes and other problems. might want to check that. also u may have damaged the system card

[krm]

Re: lexmarkT642 dead

I looked at fuser and could not see a switch to change to 110V. What am I looking for? Is it possible that the fuser could blow out the LVSB?

[Silvertoast]

Re: lexmarkT642 dead

sorry that was a mistake on my part i meant power supplies not fusers. cant remember now if us said u replaced the power supply or not