Lexmark XS796de doc feeder adjustment

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nathicana
    Trusted Tech

    Site Contributor
    250+ Posts
    • Aug 2008
    • 327
    #1

    Lexmark XS796de doc feeder adjustment

    I'm trying to correct a side to side image shift on a Lexmark XS796de. It only occurs when the original is fed through the document feeder. Does anyone know the df centering adjustment? Lead edge timing is fine but I would like to know all the adjustments. The problem happens on single sided and duplex. On 2:2 duplex the up facing side has the shift but the side facing down in the df comes out properly centered. On 1:2 duplex both sides are shifted.

    Firmware has been updated. I looked in 26 and 36 mode and didn't find the adjustment. There must be an adjustment mode I don't know about or a calibration procedure.

    Thanks
    Tags: None
    • subaro
      Service Manager

      1,000+ Posts
      • Oct 2010
      • 1274
      #2
      Re: Lexmark XS796de doc feeder adjustment

      http://downloads.lexmark.com/webcontent/training/CX792/C792_X792_Study_Guide.pdf
      THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

        Comment

        • brodstol
          Junior Member
          • Aug 2012
          • 5
          #3
          Re: Lexmark XS796de doc feeder adjustment

          Originally posted by nathicana
          I'm trying to correct a side to side image shift on a Lexmark XS796de. It only occurs when the original is fed through the document feeder. Does anyone know the df centering adjustment? Lead edge timing is fine but I would like to know all the adjustments. The problem happens on single sided and duplex. On 2:2 duplex the up facing side has the shift but the side facing down in the df comes out properly centered. On 1:2 duplex both sides are shifted.

          Firmware has been updated. I looked in 26 and 36 mode and didn't find the adjustment. There must be an adjustment mode I don't know about or a calibration procedure.

          Thanks
          Enter 2 and 6 Configuration mode

          Go to Scanner Manual Registration

          Print Quick Print test and then use that page to do the copy quick test

          You will then need to make adjustments through the ADF FRONT menu.

          Use horizontal adjust to get the image centerd.

          Hope this helps

            Comment

            • nathicana
              Trusted Tech

              Site Contributor
              250+ Posts
              • Aug 2008
              • 327
              #4
              Re: Lexmark XS796de doc feeder adjustment

              Originally posted by brodstol
              Enter 2 and 6 Configuration mode

              Go to Scanner Manual Registration

              Print Quick Print test and then use that page to do the copy quick test

              You will then need to make adjustments through the ADF FRONT menu.

              Use horizontal adjust to get the image centerd.

              Hope this helps

              Thank you this adjustment works.

                Comment

                • redneckstylin
                  Trusted Tech

                  100+ Posts
                  • Sep 2011
                  • 173
                  #5
                  Re: Lexmark XS796de doc feeder adjustment

                  manual on its way sir

                    Comment

                    Previous template Next
                    Working...