Ricoh Pro 1107 smudged

[bojans]

Hi,

This unit has very bad smudged output (picture).
Changed developer, but still bad.
Any idea what is wrong? Could it be Development Unit.
thank youslika1.jpg

[francisco]

Re: Ricoh Pro 1107 smudged

Hi,

This unit has very bad smudged output (picture).
Changed developer, but still bad.
Any idea what is wrong? Could it be Development Unit.
thank you[ATTACH=CONFIG]39867[/ATTACH]

[bojans]

Re: Ricoh Pro 1107 smudged

Thank you,
Will try tomorrow.

[slimslob]

Re: Ricoh Pro 1107 smudged

I would go there with a known good transfer belt unit.

[bojans]

Re: Ricoh Pro 1107 smudged

It was Katun drum. Some Brasso polish solved problem.

Thank you for help.

[butcher]

Re: Ricoh Pro 1107 smudged

Hi,

This unit has very bad smudged output (picture).
Changed developer, but still bad.
Any idea what is wrong? Could it be Development Unit.
thank you[ATTACH=CONFIG]39867[/ATTACH]

,ll


Check the Drum drive. See if the belt has broken or come off

[Phil B.]

Re: Ricoh Pro 1107 smudged

,ll


Check the Drum drive. See if the belt has broken or come off

OP just stated (a year before your suggestion ) it was a aftermarket (shitty brand IMHO) katun drum!

[butcher]

Re: Ricoh Pro 1107 smudged

OP just stated (a year before your suggestion ) it was a aftermarket (shitty brand IMHO) katun drum!

Oops! my bad.....haha