W3600 toner all over page

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • docresources
    Junior Member
    • Feb 2017
    • 7
    #1

    W3600 toner all over page

    Hello,

    Have a ricoh w3600 that I replaced the drum, side drum cleaners, fuser cleaner and a belt. After tearing it down, cleaning everything and finding a new spring for one of the corona wires (lost it). Something is dumping toner all over the page. I have taken it back apart and don't see anything out of the ordinary. Any help would be great. Ive attached a picture20181220_143629.jpg

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 35067
      #2
      Re: W3600 toner all over page

      Looks like drum spotting to me.Is it a Ricoh drum or an after market drum? Has it been setting on the parts shelf for an extended period of time or in a room with high humidity?

        Comment

        • docresources
          Junior Member
          • Feb 2017
          • 7
          #3
          Re: W3600 toner all over page

          Originally posted by slimslob
          Looks like drum spotting to me.Is it a Ricoh drum or an after market drum? Has it been setting on the parts shelf for an extended period of time or in a room with high humidity?
          It is a factory drum and it was very well packed, and protected. The dots are not consistent also. Also I have taken the drum back out and see no marking.

          Sent from my SAMSUNG-SM-G930A using Tapatalk

            Comment

            • Phil B.
              Field Supervisor

              10,000+ Posts
              • Jul 2016
              • 22808
              #4
              Re: W3600 toner all over page

              Originally posted by docresources
              It is a factory drum and it was very well packed, and protected. The dots are not consistent also. Also I have taken the drum back out and see no marking.

              Sent from my SAMSUNG-SM-G930A using Tapatalk
              life on dev unit?

                Comment

                • tsbservice
                  Field tech

                  Site Contributor
                  5,000+ Posts
                  • May 2007
                  • 7635
                  #5
                  Re: W3600 toner all over page

                  Don't know this models but check out recycling/ waste toner section. Marks look like damaged recovery blade or full recycling section.
                  A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                  Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                    Comment

                    • tjvincent
                      Trusted Tech

                      250+ Posts
                      • Apr 2008
                      • 280
                      #6
                      Re: W3600 toner all over page

                      I would replace the lower cleaning unit seal (B1253563) It's the whole lower frame of the cleaning unit with the seal attached.

                        Comment

                        • keithxxiii
                          Just a tech

                          250+ Posts
                          • Nov 2014
                          • 468
                          #7
                          Re: W3600 toner all over page

                          Originally posted by tjvincent
                          I would replace the lower cleaning unit seal (B1253563) It's the whole lower frame of the cleaning unit with the seal attached.
                          Agree on this. Also make sure the toner collection coil is not clogged at the end.
                          Aye! Cut the crap

                            Comment

                            Previous template Next
                            Working...