Hi, im new here, my problem Ricoh printer show many error code such as SC860, SC870, SC872, SC925 this problem occur after i set printing and scanning . and the major problem is number 7 button on printing device isnt work.. so i can't enter SP code 107, my printer connect using switcher Dlink
Ricoh MP 2851
Collapse
X
-
-
Re: Ricoh MP 2851
Are you using the correct driver and is the cable good?
Clear print queue and install correct driver if you're not using the correct driver.
If you can't get into service mode to format HDD you can always use a PC but that would mean a full format and users would need to be programmed again.
Sent from my WAS-LX1 using Tapatalk
Comment