looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Daniel
    Technician
    • Dec 2012
    • 15

    #1

    [Wanted] looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

    I have a Toshiba 3510c that is working ok. I have a GA-1210 EFI Fiery controller that I cannot access to set up. I do not have the password. I can print test pages from the printer screen but I cannot access to change the ip, gateway or the Subnet Mask. I cannot access the fiery through the network by file download or command panel. The ip the fiery is set manual to 10.164.10.31 and the ip address of my network is 192.168.0.151 The software on the fiery is system 8e ver. 1.0 I would like to get the fiery working if possible at a reasonable price. If not I will like to sell it. My number is 904-234-3470 and e mail is Daniel@hmd99.com Thanks, Daniel
  • charm5496
    Service Manager

    Site Contributor
    1,000+ Posts
    • Apr 2008
    • 2387

    #2
    Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

    Did you try the default password of Fiery.1?
    Accidents don't just happen. They must be carelessly planned.

    Comment

    • Daniel
      Technician
      • Dec 2012
      • 15

      #3
      Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

      I tried fiery.1 I will try Fiery.1 to see if that will work

      Comment

      • Daniel
        Technician
        • Dec 2012
        • 15

        #4
        Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

        I have tried Fiery.1 and it works, thanks. I will now try to set the fiery up and will let you know the results.

        Comment

        • Daniel
          Technician
          • Dec 2012
          • 15

          #5
          Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

          I have changed the ip, subnet mask and the default gateway to match the printer, but now when I start it goes to "controller is booting " and seems to hang there. what should I do now? How can I get back to the setting page?

          Comment

          • Daniel
            Technician
            • Dec 2012
            • 15

            #6
            Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

            I can access the fiery with command workstation using admin with password Fiery.1. I can also enter 192.168.0.151 into my web browser and see all the information but when I click on launch configure I just get a blank pop up page. also when I push the extension button on the printer I get "could not connect to host" It is like the fiery is not connected to the printer. any ideas?

            Comment

            • Mr Spock
              Vulcan Inventor of Death

              1,000+ Posts
              • Aug 2006
              • 2064

              #7
              Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

              Originally posted by Daniel
              I can access the fiery with command workstation using admin with password Fiery.1. I can also enter 192.168.0.151 into my web browser and see all the information but when I click on launch configure I just get a blank pop up page. also when I push the extension button on the printer I get "could not connect to host" It is like the fiery is not connected to the printer. any ideas?
              Set machine nic to dhcp as it will get an ip from the fiery. The fiery takes 2 ip address next to each other $(ie 192.168.1.100 and 192.168.1.101). The lower is the fiery and upper is machine. Make sure the machine nic is plugged into the fiery via a crossover cable. also make sure the "scsi" cable is plugged in as well.
              And Star Trek was just a tv show...yeah right!

              Comment

              • Daniel
                Technician
                • Dec 2012
                • 15

                #8
                Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                I have worked on this all day long. I have now given up. Dose anyone want to try to set this up? I am willing to sell the interface, scsi cable and efi fiery ga-1210 for a Toshiba 3510c printer. I have printed fron the printer touch screen a ps test page and the configuration pages. I can connect with a browser and with the command workstation but cannot make everything work together. and most of the time I get cannot connect to host from the printer touch screen when the extension button is pressed. WOW what a waste of my time today,

                Comment

                • Mr Spock
                  Vulcan Inventor of Death

                  1,000+ Posts
                  • Aug 2006
                  • 2064

                  #9
                  Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                  If I had time I would come and do it for you. 4 hour drive each way and 2-3 hours of setup time do not make an easy day.
                  And Star Trek was just a tv show...yeah right!

                  Comment

                  • Daniel
                    Technician
                    • Dec 2012
                    • 15

                    #10
                    Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                    Originally posted by Mr Spock
                    If I had time I would come and do it for you. 4 hour drive each way and 2-3 hours of setup time do not make an easy day.
                    Thanks Mr. Spock. I have just about decided to go to a bridge and see how long the fiery will float. I do not know why when I log in to the fiery with a browser with webtools, I can see everything as I should but when I launch configure and enter the admin password I get a blank page. I have tried with windows xp 32 bit system laptop. and firefox, explorer and chrome browsers on my main computer which is win7 64 bit. I think it needs a good salt water float test.

                    Comment

                    • Mr Spock
                      Vulcan Inventor of Death

                      1,000+ Posts
                      • Aug 2006
                      • 2064

                      #11
                      Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                      Originally posted by Daniel
                      Thanks Mr. Spock. I have just about decided to go to a bridge and see how long the fiery will float. I do not know why when I log in to the fiery with a browser with webtools, I can see everything as I should but when I launch configure and enter the admin password I get a blank page. I have tried with windows xp 32 bit system laptop. and firefox, explorer and chrome browsers on my main computer which is win7 64 bit. I think it needs a good salt water float test.
                      webtools/configure requires either an active x or java plugin to run correctly. I forget which it is. I usually just use the extension button. You can try setting the machine nic to dhcp and see if it will pull an ip from the fiery. If so then you should be able to use the machines nic for printing and scanning. Also this ip will look totally foreign to you network but it should be able to get the job done.
                      And Star Trek was just a tv show...yeah right!

                      Comment

                      • JSC
                        Gimp

                        500+ Posts
                        • Dec 2006
                        • 618

                        #12
                        Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                        Mr Spock is correct, you need to up date java. I had this the other day. I was getting a blank (white) screen until I updated java on my lapie.
                        The gene pool could use a little chlorine.

                        Comment

                        • Simons
                          Trusted Tech
                          • Jun 2008
                          • 490

                          #13
                          Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                          Will THAT Toshiba even have win 7 drivers? last I checked Toshiba supports a box for 5 years and then drops driver development for it too.

                          Comment

                          • Daniel
                            Technician
                            • Dec 2012
                            • 15

                            #14
                            Re: looking for someone to service or reload software on a Toshiba GA-1210 fiery 8e

                            Originally posted by Simons
                            Will THAT Toshiba even have win 7 drivers? last I checked Toshiba supports a box for 5 years and then drops driver development for it too.
                            I will agree with you on the drivers. The xp drivers work ok with the fieries I have used thus far on win 7. There is also a universal driver for the MFP from Toshiba.

                            Comment

                            Working...