Xerox dc 250/252 fuser fuse/chip in EU or in USA-(low shiping cost)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sanimir
    Trusted Tech
    • Nov 2010
    • 183

    #1

    [Wanted] Xerox dc 250/252 fuser fuse/chip in EU or in USA-(low shiping cost)

    I need for xerox dc250/252 2 fuser fuse/chip for buy in EU or in USA-(low shiping cost).
  • xcopytech
    Service Manager

    1,000+ Posts
    • Aug 2006
    • 1794

    #2
    Re: Xerox dc 250/252 fuser fuse/chip in EU or in USA-(low shiping cost)

    You can use any thermal fuse (90 C degrees) to reset fuser assy.

    Also you can do this in HFSI.

    Comment

    • sanimir
      Trusted Tech
      • Nov 2010
      • 183

      #3
      Re: Xerox dc 250/252 fuser fuse/chip in EU or in USA-(low shiping cost)

      Originally posted by xcopytech
      You can use any thermal fuse (90 C degrees) to reset fuser assy.

      Also you can do this in HFSI.
      Thanks

      I prefer shopping because I'm a classic mechanic, I'm not an expert in electronics - unfortunately

      Comment

      • Exok
        Senior Tech

        500+ Posts
        • Jun 2011
        • 750

        #4
        Re: Xerox dc 250/252 fuser fuse/chip in EU or in USA-(low shiping cost)

        The reset fuse is not xerox specific. As stated above you just need to install a new 90C thermal fuse. You can obtain these from any electronics vendor. Remove the top cover and locate and remove the fuse (2 screws). Make sure the unit is cool before you install the new fuse as you do not want it to pop early. When you reinstall the fuser with the new fuse and the machine warms up, it will first read a short across the fuse then the fuse will blow, this resets the fuser count back to 100% life.

        Comment

        • sanimir
          Trusted Tech
          • Nov 2010
          • 183

          #5
          Re: Xerox dc 250/252 fuser fuse/chip in EU or in USA-(low shiping cost)

          Originally posted by Exok
          The reset fuse is not xerox specific. As stated above you just need to install a new 90C thermal fuse. You can obtain these from any electronics vendor. Remove the top cover and locate and remove the fuse (2 screws). Make sure the unit is cool before you install the new fuse as you do not want it to pop early. When you reinstall the fuser with the new fuse and the machine warms up, it will first read a short across the fuse then the fuse will blow, this resets the fuser count back to 100% life.

          this is ok: ESKA Temperaturni osigura

          or this: 2 x Temperatursicherung 91 Grad 91

          and this: 5 Pcs Ry TF 90

          best regards
          Last edited by sanimir; 01-29-2015, 08:54 AM.

          Comment

          Working...