If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Kahn,
Thank you for the generous offer. Would you have a line on the manuals for the WC7830?
I have one with a blank display and all the panel lights are on. It does not respond to anything
I've done so far.
Rat, The connector on the UI is very touchy. The other end of the cable is the same. The standard connect - disconnect procedure may work, but I also used some of that goop the Parts Drop sells for connectors. Seems ok now, but the connection doesn't seem to be the most positive.
Scarecrow,
I found the manual I needed on service-manuals.com. In a PDF file.
I will have to look up the U1 reference you spoke of before I can re-seat it. Sometimes I will use CRC-226 on the
connectors after some contact cleaner. But very sparingly.
Xerox WorkCentre 7556 Family (7525/7530/7535/7545/7556)
https://yadi.sk/d/qBYnCooQ3WeuLh
My profile is not working at the moment. The profile you see is not mine. Board redirects to a wrong userprofile. So you CAN“T REACH ME over the profile via SEND PRIVATE MESSAGE and even not over regular Email too
You only can contact me if you click my name on a post and select PRIVATE MESSAGE straight from there.
Comment