Xerox WC 7232 programming formatted Hard Disk

[JohnCo]

I bought a used Xerox workcentre 7232 for a parts machine for a customer who wanted to keep their old 7232 running without buying $1,000 belt. Upon seeing the parts machine they decided they wanted to use it as their primary as it was cleaner and not as worn out.

*Problem!! The machine I got from the wholesaler has a formatted hard drive. Can the HD's be switched or are they married to each machine ? Or does anyone have the procedure to program a formatted Hard Drive and set the machine to Factory Specs.

Stuck across the Red River Thanks JohnCo

[Iowatech]

Re: Xerox WC 7232 programming formatted Hard Disk

It might be more productive to look for an answer to that here:
http://www.copytechnet.com/forums/xerox/

[JohnCo]

Re: Xerox WC 7232 programming formatted Hard Disk

Hi Iowa;
Thanks for steering in the right direction. I'm new to the site but have learned a lot just checking out forums. So I guess you directed me to the Xerox forum to post my question and put me in the arena where I would most likely find a answer to my question.
So should I repost in the Xerox forum, I don't remember seeing my post over there.
Again Thanks, any help is Greatly Appreciated ,


JohnCo