GR3770 cable

[Guest]

Hello everyone, I was lucky enough to be given a GR3770 last week. I was able to power it up with a generic power source but I am missing the connector to a computer source. On the back it looks like a 32 pin connector. Im wondering if theres an updated adapter for this to connect to my macbook. Also if there's any drivers or software I may need, can anyone point me in that direction. Sorry if these questions are very basic, I am very new to Risographs.

Thank you in an advance for any replies.

All the best,
Steve

[farabundo]

Re: GR3770 cable

Hello everyone, I was lucky enough to be given a GR3770 last week. I was able to power it up with a generic power source but I am missing the connector to a computer source. On the back it looks like a 32 pin connector. Im wondering if theres an updated adapter for this to connect to my macbook. Also if there's any drivers or software I may need, can anyone point me in that direction. Sorry if these questions are very basic, I am very new to Risographs.

Thank you in an advance for any replies.

All the best,
Steve

You'll have probably figured this out by now, but check this thread if not: http://www.copytechnet.com/forums/di...terfacing.html. You'll need an interface cable, a RIP, drivers, and an old Windows PC in order to print from a computer to the Riso (3770). It's more trouble and money than it's worth most likely.