Good morning! If you are reading this, thank you for your time!
I have a MP W5100 that requires service. A mouse got in to the PSU and chewed through several of the harnesses that connect to the PSU. Of course the mouse chewed as close as he/she could to the connector to make splicing a pain in the rear.
I did manage to splice it enough to get it working again, but I want to order new ones to replace them for safety sake.
My problem is that looking at the P2P diagram I see the harnesses, CN125, CN126, CN127, CN128, and CN129, but none of them have a part number associated with them.
I also checked the Parts Manual, and the only thing I found were harness clamps.
I don't have access to the 3D parts catalog software, employer won't allow the software to be installed.
Does anyone know where I can get the part numbers for the harnesses or know the part numbers?
I'd greatly appreciate it!
I have a MP W5100 that requires service. A mouse got in to the PSU and chewed through several of the harnesses that connect to the PSU. Of course the mouse chewed as close as he/she could to the connector to make splicing a pain in the rear.
I did manage to splice it enough to get it working again, but I want to order new ones to replace them for safety sake.
My problem is that looking at the P2P diagram I see the harnesses, CN125, CN126, CN127, CN128, and CN129, but none of them have a part number associated with them.
I also checked the Parts Manual, and the only thing I found were harness clamps.
I don't have access to the 3D parts catalog software, employer won't allow the software to be installed.
Does anyone know where I can get the part numbers for the harnesses or know the part numbers?
I'd greatly appreciate it!
Comment