minolta Di450 C 0F 24 error code

[Guest]

Does anybody know what the part number is for a AIDC sensor on a Di 450 Minolta is???

[wagon]

Are you SURE the sensor is stuffed and not just dirty? Do the usual clean the sensor, F5, etc. and see how you go.

[wyched]

Thanks for getting back to me so quickly, I tried to do F5 but when I turn the mach on and clear the code it comes right back before I can do the F5 I've taken the sensor out and made sure the conections were tight.
do you have a part number? do you knowwhere I can get the part?

[wagon]

I would expect Konica-Minolta would be the only suppliers of this part. Maybe you could rat one out of a wreck?

[Scott_Lewis]

Does anybody know what the part number is for a AIDC sensor on a Di 450 Minolta is???

1149-0107-01 PW BOARD-G (AIDC)

[Rudi]

Never ever have i had a sensor like that giving me problems on this model , i have however had this particular code because of the anti spill plate being faulty or worn .

[Rudi]

Part number

The begining of the number:1149 doesnt that refer back to the EP2080 or somewhere around there , YOU KNOW WHEN MINOLTA WAS STILL MINOLTA.

[wagon]

Never ever have i had a sensor like that giving me problems on this model , i have however had this particular code because of the anti spill plate being faulty or worn .

The begining of the number:1149 doesnt that refer back to the EP2080 or somewhere around there , YOU KNOW WHEN MINOLTA WAS STILL MINOLTA.

Sounds about right - the sensor is probably getting covered in crap...

And Minolta was still really good before the merger - Konica crap, Minolta good, (but you still have a half-decent machine). BUT they should have sacked all of the Konica engineers in Japan and destroyed every Konica box they could.

BTW, I loved the di450/550/470/552... they were great machines.