Part # for Updated Toshiba 756 Drum Separation Fingers

**Acme** · 01-15-2014, 09:16 PM

Re: Part # for Updated Toshiba 756 Drum Separation Fingers

this what your looking for?

Models: e-STUDIO853 Series , e-STUDIO855 Series and e-STUDIO856 Series

Subject: Countermeasure to Paper Jams Caused by Drum Separation Fingers (E010 Error)

Overview
The method of applying pressure of the Drum Separation Fingers has been changed to prevent paper jams (E010 errors) from occurring.

Detail

A: The 3 weights have been removed.
B: The stopper has been removed.
C: Springs have been added to the 2 Separation Fingers at the rear side. (Color: silver)
D: A Spring has been added to the Separation Finger at the front side. (Color: black)

To install the new springs on machines serial manufactured prior to the serial numbers listed above, use the following Installation Instructions.

1. Remove the weights [A] and spacer [B] (if installed).

2. Assemble as shown in the illustration below.
(1) Insert long end of the spring [I] into hole [H]
(2) Insert pin [E] into hole [G]
(3) Make sure that the end of the spring is positioned as shown in [F]

Changed/Added Part No.

520/600/720/850 523/603/723/853 555/655/755/855 556/656/756/856	49-104	6LE04136000 SCREW-CLAW	---
49-27	6LH73730000 STOPPER-CLAW-B	---
49-28	---	6LH68632000 SPG-ASSIST-CLN-R	Qty.: 2 pcs. Color: Silver
49-29	---	6LH68631000 SPG-ASSIST-CLN-F	Qty.: 1 pc. Color: Black

Part # for Updated Toshiba 756 Drum Separation Fingers

Part # for Updated Toshiba 756 Drum Separation Fingers

Comment