Bizhub C754e erro C-2151

[slytukana]

I installed a new bizhub C754e and it is coming up wt this error try changing the second transfer roller bt still the same is a new installation.

Sent from my SM-G360G using Tapatalk

[allan]

Re: Bizhub C754e erro C-2151

Have a good look at PS-50 and M3 drive.

[slytukana]

Re: Bizhub C754e erro C-2151

Thanks will try that

Sent from my SM-G360G using Tapatalk

[Mr. Joshua]

Re: Bizhub C754e erro C-2151

I have one giving this code at about 200k. Gear assembly etc. seems fine. It was a little dry to lubed it up. Have swapped out the transfer roller, M3 motor and PS50 sensor with known good, checked transfer belt output for clog and general ease of turning. Probably going to have to try a PFTDB board next.

[Synthohol]

Re: Bizhub C754e erro C-2151

have you run load check yet?