C-3508 in c6500

[Shinigami]

Hello i have the code c-3508 all time after 3 or 4 print page ! I switch the dipswitch 3-1 but the same error all time !

[Shinigami]

Re: C-3508 in c6500

Hello i have the code c-3508 all time after 3 or 4 print page ! I switch the dipswitch 3-1 but the same error all time !

helpppppp

[Synthohol]

Re: C-3508 in c6500

dude, get a manual.

[Shinigami]

Re: C-3508 in c6500

dude, get a manual.

I have the manuel ! I change the fusing uint ! Fusing board ! Dipswich !

[Synthohol]

Re: C-3508 in c6500

that info should have been in your first post man,

C-3508 Fusing roller paper winding abnormality. thats an odd one, what the hell does it even mean? paper winding? seriously?

[Shinigami]

Re: C-3508 in c6500

that info should have been in your first post man,

C-3508 Fusing roller paper winding abnormality. thats an odd one, what the hell does it even mean? paper winding? seriously?

But i change the fusing unit completely

[tulintron]

Re: C-3508 in c6500

I have the manuel ! I change the fusing uint ! Fusing board ! Dipswich !

If you change the fuser unit and the defect persists, being 3508 after 03 or 04 prints, your Face up and Face down, change paper types, simplex or duplex,
Leaf by leaf, increasing the amount gradually

I believe that after this, you will have news.