Konica FS-536 misalignment of stapled documents

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • barber782
    Trusted Tech

    250+ Posts
    • Aug 2011
    • 279
    #1

    Konica FS-536 misalignment of stapled documents

    Hi all,

    Have a customer with a C458 and FS-536 finisher. Anything sent to the sorter tray to be stapled (1 or 2 staple) will be misaligned.
    For example, sent a 10 page document to be stapled, once they enter the sorter tray one or two pages will be offset, much so that the staple misses them completely.

    So far:

    Iv taken out the eject assembly and checked over, nothing seems out of sorts.
    Checked the condition of the paddle ass'y, checked for worn/damaged/obstructive mylars.
    Paper is ok.
    Adjusted the width of jogger guides in service mode.
    Still no good.
    Machine about 6 months old.

    Any help would be appreciated.

    Cheers
    Tags: sorter, staple, stapled, tray
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22942
      #2
      Re: Konica FS-536 misalignment of stapled documents

      This finisher is a close relative to the FS-534, so take a look at the regulating plates and the eject arms.

      Yes the FS-536 has slightly modified parts, but not all that different. check out this link:
      FS-534 alignment plate wearing.

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • barber782
          Trusted Tech

          250+ Posts
          • Aug 2011
          • 279
          #3
          Re: Konica FS-536 misalignment of stapled documents

          Yes I see that there is a metal plate mounted on top of those guides already. Read that post before. Thanks anyway.

          Sent from my GT-I9195 using Tapatalk

            Comment

            • B0265
              Senior Tech

              500+ Posts
              • Jan 2007
              • 718
              #4
              Re: Konica FS-536 misalignment of stapled documents

              How did you solve this?

                Comment

                • REGSIS
                  Trusted Tech

                  250+ Posts
                  • May 2016
                  • 434
                  #5
                  Re: Konica FS-536 misalignment of stapled documents

                  If under warranty, go for ejector unit.

                    Comment

                    • dave novak
                      Technician
                      • Oct 2013
                      • 10
                      #6

                        Comment

                        Previous template Next
                        Working...