PDA

View Full Version : Error C186 on bizhub C360


Custom Search


Midas Prints
08-19-2020, 08:54 PM
Error C186 on bizhub C360, how do I clear this, somebody help

tulintron
08-19-2020, 09:03 PM
Error C186 on bizhub C360, how do I clear this, somebody help A dynamic link error occurs in the program on the MFP board due to an insufficient memory space available, a ROM fault, or other reason when the main power switch is turned ON.

Phil B.
08-19-2020, 09:20 PM
A dynamic link error occurs in the program on the MFP board due to an insufficient memory space available, a ROM fault, or other reason when the main power switch is turned ON.

being an end-user.. i think this is above his pay grade.

tsbservice
08-19-2020, 09:24 PM
Error C186 on bizhub C360, how do I clear this, somebody help
Did you happen to do Initialization before that error?

femaster
08-20-2020, 02:10 AM
Just to add to the problem description previously posted, in case anybody in the future comes searching for this code:

Relevant electrical parts:


MFP board (MFPB)
NVRAM board (NRB)


Procedure:

If the malfunction code “C-C172” has occurred, access
[Service Mode] → [System 2] →[Image Controller Setting]
and check to see if “Controller 1,” “Controller 2,” “Controller
3,” or “Others” is set for [Image Controller Setting].
If any of these is set, according to the kind of controller,
select “Controller 0” or “Controller 1.”
Change MFPB
When not reviving even if the above-mentioned procedure is
done, contact the responsible people of KM.


And I have to say, that last line is really funny, as it actually says that in the service manual. :cool:

zoool
08-20-2020, 10:38 PM
did you change some boards? change firmware? if no then please preform nvram initialization from pendrive

Custom Search