Konica 7130 error code F-56-11

[Guest]

I changed the main board and kept the original memory board. Now I'm getting the F-56-11 code. I understand from the intravia manuel that this is a communication; control board issue.
If anyone can help, it would be greatly appreciated.
Thanks in advance,
David

[copytechman]

Did you reflash the firmware? Recommended per the service manual.
Regards.
A.

[dvdasmth]

Konica 7130 error code F-56-11

Dear A,
No, I haven't flashed the firmware. Is this info in the Intravia manuel? I don't have a service manuel for this machine yet.
Thank you for your reply.
dvdasmth

[pepper38_cnd]

Check you email for a YouSendIt link, everything you need is there, If you have any questions, Ask first.

[smiley]

Check you email for a YouSendIt link, everything you need is there, If you have any questions, Ask first.

hi friend can you also send me the link please i dont have the manual of this machne also.please. this is my mail neil_ivere@yahoo.com.ph thanks

[smiley]

Check you email for a YouSendIt link, everything you need is there, If you have any questions, Ask first.

thank you soo much got it...