copytechman
Senior Tech
Last Activity: 45 minutes ago
Joined: 11-25-2008
Location: Barrie, Ontario
-
C3070L FS532 +SD510 tri-fold adjustment
I have a C3070L with 55 version firmware and N2 @ 80 and I cannot find FOLD2, the instructions (see below) don't match the menu on the device either to... -
Seconding spam or junk or inbound filtering due to email address inconsistency however if it say job complete its left the building.
Regards... -
The FS533 isn't available for the newest models now, from the C450i catalog tho:
FS-533 FS-533 Finisher (50-sheet inner staple finisher): bizhub...Leave a comment:
-
Funny i have always used 587 and TLS with Gmail.. go figure.
A....Leave a comment:
-
Are you unfamiliar with where to input the correct scan to email information in this device via the web interface to make it actually scan to email?...Leave a comment:
-
I always replace the drums as a complete unit, never the parts inside of it when there's a specific problem related to a specific drum colour.
...Leave a comment:
-
Alternatively you could use the scan to box with built in SMB file share capability of that device if you are familiar with how that's configured. Scan...Leave a comment:
-
Does it jam the same with plain paper of the same size?
A.Leave a comment:
-
Definitely bad scanner bend or warp there agree with what others have stated.
A.Leave a comment:
-
Transfer belt cleaning goes bad on these all the time and can throw off the stabilization and colour registration, make sure that the 2 colour reg sensors...Leave a comment:
-
Cust called back after my lastest change so I bumped the fuser temp +5 deg and disabled sleep because apparently it was happening when it woke up but...Leave a comment:
-
This.... new style switch back unit can be bought as an assembly.. or could be.
Regards.
A....Leave a comment:
-
As far as I am aware those document feeders don't have aps that way, I think you can set it to mixed size originals to read each ones length but otherwise...Leave a comment:
-
Weight settings correct for media? If so tweak 2nd transfer values? Just a thought. How does it look on plain paper? (mentioned blotchy gradations,...Leave a comment:
-
New style fuser is installed, found a bulletin regarding an engine dipsw as well (not the ones included in the box with the new fuser) trying that before...Leave a comment:
No activity results to display
Leave a comment: