C454 black drum black band

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • positiveg
    Trusted Tech
    250+ Posts
    • Jun 2018
    • 298
    #1

    C454 black drum black band

    There's a black band I found I think on two separate black drums. I just realises that the black band shows uo I think was on a previous drum as well not sure.
    I think it may have been causing some light prints on the far edge of the paper 11x17 and 12x18 prints.
    I put in an old black drum, waiting for rhe new one which is set to deliver tomorrow.
    I'm attaching a photo of the drum
    Thanks


    Sent from my SM-G780G using Tapatalk
    Tags: None
    • allan
      RTFM!!
      5,000+ Posts
      • Apr 2010
      • 5402
      #2
      Re: C454 black drum black band

      Check if the develop on the roller is not raised that side. Could be that is still has an old type mag roller without the splines that got polished.
      Whatever

        Comment

        • Toxic
          Senior Tech
          500+ Posts
          • Dec 2009
          • 688
          #3
          Re: C454 black drum black band

          Or dirty charging corona mesh

            Comment

            • tsbservice
              Field tech
              Site Contributor
              5,000+ Posts
              • May 2007
              • 7389
              #4
              Re: C454 black drum black band

              Looks like rebuild drum unit?
              A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
              Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                Comment

                • positiveg
                  Trusted Tech
                  250+ Posts
                  • Jun 2018
                  • 298
                  #5
                  Re: C454 black drum black band

                  Originally posted by allan
                  Check if the develop on the roller is not raised that side. Could be that is still has an old type mag roller without the splines that got polished.
                  Yeah will pull the developer if it continues having that issue. The two prints I ran after they came out clear. Not aure if it will reappear after a while. If it does then I will definitely pull the developer and take a look. Thanks much

                  Sent from my SM-G780G using Tapatalk

                    Comment

                    • positiveg
                      Trusted Tech
                      250+ Posts
                      • Jun 2018
                      • 298
                      #6
                      Re: C454 black drum black band

                      Originally posted by tsbservice
                      Looks like rebuild drum unit?
                      This one might be

                      Sent from my SM-G780G using Tapatalk

                        Comment

                        Previous template Next
                        Working...