If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Machine can see tray 2 it just says it is empty. We replaced the paper detect sensor and still shows empty. Swapped paper drawers and still empty. Any ideas?
Machine can see tray 2 it just says it is empty. We replaced the paper detect sensor and still shows empty. Swapped paper drawers and still empty. Any ideas?
id try removing the PF13 and reseating copier
or just replace the entire tray, they are surprisingly cheap
Comment