mrfuser
Service Manager
Last Activity: 1 week ago
Joined: 05-03-2007
Location:
-
it was 1 drum causing all the grief. prior company servicing the unit left the bad drum in there. I ordered all new drums and replaced 1 at a time,... -
Can you please elaborate on what to adjust on the the K drum to make it CMY compatible on the 8 series? Thanks for the PIC but i don't see what to adjust... -
What exactly are you adjusting? Can't figure out from pic, sorry...Leave a comment:
-
Not yet, but is that a problem on the 8 series? Never had a problem on the 4 series doing that....Leave a comment:
-
Yeah I have tried different belts with same result but am wondering if the gears inside the machine are not providing the lift to the belt properlyLeave a comment:
-
Is it possible that the transfer belt is not lifting properly? Anyone ever seen that?Leave a comment:
-
ok, pulled the toner hopper assembly cover and watched when adding toner. The gears , small white ones on front, are not turning during any of the procedure....Last edited by mrfuser; 2 weeks ago.Leave a comment:
-
yep all same pattern. so oddLeave a comment:
-
yep, very odd. I have added toner in service mode to the point where they are 7+ and no change. baffledLeave a comment:
-
That was my thought. Replaced DV and same result. argh!Leave a comment:
-
Laser windows cleaned with windex after removing DV units. same result. Hmmm
see pic...You do not have permission to view this gallery.
This gallery has 1 photos.Leave a comment:
-
All developers look fine and I even replaced cyan just to make sure. I’ll try cleaning the glass after removing the dv units to see if that helps....Leave a comment:
-
Bizhub c258 Faded on OP Side only
Bizhub c258 works fine other than faded color on OP Side only. Blacks are fine. Replaced drums, transfer belt, transfer roller, reset stabilization...
No activity results to display
Leave a comment: