If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyone have the part number for the updated feed section to tray #3/4. It keeps jamming on the heavy ledger paper only on these trays. Already did tires and applied felt cleaner to back of tray to increase pressure.
Just fit a packing piece onto the lug on the rear of the trays ..the bit that pushes the white arm that drops the feed section onto the paper. The spacer (packing piece) is needed to ensure that the lever fully drops the assembly.
Comment