biz 600 KM logo at start up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • masterteknicion
    Technician
    • Jan 2009
    • 48
    #1

    biz 600 KM logo at start up

    I have a biz 600 that is displaying the KM logo only and does nothing else.
    I have replace the system control board
    I have also replace the nvram, and no luck.
    I have put vers. 10 on it to start with on new cf cards as well. Then flashed it to vers. 17, then 20 and then 31.
    Disconnected the hdd.

    After all that it is still showing the logo.

    Any help would be appreciated.
    Tags: 600, dirty, forgot, logo, prcb, printer control board, sound, start, usb
    • masterteknicion
      Technician
      • Jan 2009
      • 48
      #2
      I have also replace the scanner driver board.

      Still with no luck.

        Comment

        • TheOwl
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2008
          • 1732
          #3
          I had this problem when I replaced the System Control not that long ago, but it turned out that I had forgot the CF card on the back of the SYS board.

          Pulled it out of the old one, then put it in the new board and away the machine went.
          Please don't ask me for firmware or service manuals as refusal often offends.

            Comment

            • tarzak911
              Technician

              50+ Posts
              • Feb 2009
              • 55
              #4
              this is going sound far fetched have u replaced lamp and lamp inverter board in the scanner,, try this and let me know,

                Comment

                • mrwho
                  Major Asshole!

                  Site Contributor
                  2,500+ Posts
                  • Apr 2009
                  • 4299
                  #5
                  I had that problem once and it turned out to be the CF cards corrupted after an attempt at a firmware upgrade via USB pen drive. I had to pull out the CF cards and make a copy from a working machine.
                  ' "But the salesman said . . ." The salesman's an asshole!'
                  Mascan42

                  'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                  Ibid

                  I'm just an ex-tech lurking around and spreading disinformation!

                    Comment

                    • thuo
                      Trusted Tech

                      100+ Posts
                      • Feb 2008
                      • 155
                      #6
                      biz 600 km

                      i had a similar problem but with a different cause.there are drum potential sensors in the developing unit.if these sensors are dirty ,the machine will behave as you described.

                        Comment

                        • masterteknicion
                          Technician
                          • Jan 2009
                          • 48
                          #7
                          I have down anything with inverter board, except disconnected it and the same thing. I cleaned the machine inside and out, also.

                          Today I went back with another nvram and image control board. And the same thing is still happening.

                          Support wants me to order a new image control cf card, and then if that doesn't work replace the printer control board.

                          I will keep you posted.

                            Comment

                            • mrwho
                              Major Asshole!

                              Site Contributor
                              2,500+ Posts
                              • Apr 2009
                              • 4299
                              #8
                              Don't you have access to another machine? I think you can just copy the CF cards if they're corrupt, you don't need to buy a new one (unless they are really damaged, but even then I suppose you could just buy a regular one and then copy it).
                              ' "But the salesman said . . ." The salesman's an asshole!'
                              Mascan42

                              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                              Ibid

                              I'm just an ex-tech lurking around and spreading disinformation!

                                Comment

                                • masterteknicion
                                  Technician
                                  • Jan 2009
                                  • 48
                                  #9
                                  Finally.

                                  Replaced the PRCB board and that took care of problem.
                                  Just something to think about next time.

                                  Thanks for all the replies.

                                    Comment

                                    Previous template Next
                                    Working...