Hi, hoping someone can help.
I do not see where this FM34 is located in the parts manual. Every other fan is shown.
Does someone have a later...
216 results in 0.0446 seconds.
-
Konica Bizhub Pro 1200 BW
-
Konica C1070 error C2213 and C2214 on every print....HELP PLEASE
Dear all friends, please help me solve this weird problem.
I have Konica C1070 that was working like a charm, electricity once shut down and get... -
C3100P 004E error
Hello,
Everyone have experience the machine shows 004E code, tried power supply fan motor but no luck,
maybe this fan motor destroyed... -
Bizhub Pro 920 SC46-14
Have worked on a BHP-920 for several time and did not achieve resolve this malfunction.
When a misfeed or a paperjam occur, the machine makes a... -
bizhub 361 error 3805
I have replaced thermistor it worked for 1-2 months but the same code again . Is it PRCB or motherboard or can it be something else? -
Bizhub C554e error C-C163
hello! we have this used machine imported from EU and it's throwing this code permanently. i now what this error means (rom contents error/ incorrect... -
Bizhub pro 951 error code C-3905
Hello friends, recently we had a bizhub pro 951 that suddenly came up with error code C-3905, the service manual says:
Thermistor -
Bizhub c654/c754 error code c3102
Have got 3 of this machine series that were working but all of a sudden came up with trouble code c3102. It turn out to be the fuser motor is not turning... -
Bizhub C6000L error C-0101 and C-C101
Hello, can someone with access to official konica minolta techical resource site (not sure what is its name) check for some bulletin (or whatevet it is)...Last edited by kandod; 01-31-2021, 07:44 PM. -
PRO 951 C2810 Error Code
Afternoon fellow techs, We have a KM PRO951 that keeps throwing us a C2810 error code. Service manual states replacement of Drum potential sensor and... -
Konica minolta C8000
Hi dear all
I replace my Konica minolta c8000 PRCB
Unfortunately , It ask for firmware for PRCB
any can send PRCB firmware... -
Bizhub Press C8000 C-C101
C8000 / V60-ish fw / 4M+ copies
I need some help troubleshooting code C-C101 no response from PRCB to OACB.
The code occurred while... -
BH1052
Howdy folks,
Have a different one here. Have a BH1052, it is a little over 4 years old and has 31 million on it. I am getting a C-2411. I... -
C8000 C2220 & Toner Door Sensor
While troubleshooting a C2220 code (1st transfer not turning) the toner door sensor has stopped responding properly.
The message to close the Toner... -
Bizhub C554e PRCB Swap (used)
Is it possible to swap the print control boards (PRCB) out from another machine without bricking the machine? Thanks guys
ive got a PC-410
