biz hub 350

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • digicor
    Service Manager
    1,000+ Posts
    • Jul 2008
    • 1130
    #1

    biz hub 350

    I have a bizhub 350 making wakout copies
    doc feed or glass
    the first copie is fine, the second third forth are off the page by a quarter inch...exactlty the same after the first copy,could this be the registration clutch?? the fuser and the IU are relativly new...
    Tags: 350, hub
    • mo0651
      Service Manager
      1,000+ Posts
      • Apr 2009
      • 1054
      #2
      that would be a good start.

        Comment

        • fixthecopier
          ALIEN OVERLORD
          2,500+ Posts
          • Apr 2008
          • 4712
          #3
          Is it only out of one tray? If problem happens from both then change the reg clutch. If it does it from only tray one there is a clutch in that assembly for that tray.
          The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

            Comment

            • digicor
              Service Manager
              1,000+ Posts
              • Jul 2008
              • 1130
              #4
              It was the registration clutch!!

                Comment

                Previous template Next
                Working...