PDA

View Full Version : Konica /Minolta c960 error code


Custom Search


caveboy
03-23-2010, 04:30 AM
I just move a bizhib c350 from one location to another. Now, I am getting an error code c960 during power up and the copier doesn't work any more. Could anyone tell me what this error code means

trublu
03-23-2010, 06:38 AM
C0960


Bypass lifting motion failure


The Bypass Lift-up Sensor is not blocked even when
the Tray2 Vertical Transport Motor has turned for a
given number of pulses after the sequence to move
the Paper Lifting Plate from the standby position to the
take-up position was started.


The Bypass Lift-up Sensor is not unblocked even
when the Tray2 Vertical Transport Motor has turned for
a given number of pulses after the sequence to move
the Paper Lifting Plate from the take-up position to the
standby position was started

mo0651
03-23-2010, 03:18 PM
This code is usually caused by the white plastic spring clutch in the bypass unit. Sometime adjust the slot where the spring clips into will take care of it.

Custom Search