Bizhub C550 Splotchy Image quality

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jaymz61
    #1

    Bizhub C550 Splotchy Image quality

    please help me with this LOW print quality on C550, u can see splotchy print result on attached file. I've changed Imaging Unit and Fusing Unit but nothing solved. should i change the Transfer Belt ?!
    I've attached the print sample... please see the file
    Attached Files
    Tags: attached, belt, bizhub, bizhub c550, c55, c550, file, fuser, fusing, fusing unit, image, image quality, imaging, imaging unit, life, low, print, quality, result, sample, solved, splotchy, transfer, transfer belt, unit
    • ineo+6501
      Trusted Tech
      250+ Posts
      • Mar 2010
      • 262
      #2
      Hi

      I had a similar fault on a C550 a few weeks ago, it was the Transfer Belt.

      The belt in my C550 had been re-fused and had run almost a full cycle again so couldn't complain.

      Regards

        Comment

        • mo0651
          Service Manager
          1,000+ Posts
          • Apr 2009
          • 1054
          #3
          Give a little more info and we can help with more specific ideas! We can list a whole bunch of things. What is the life counter of the belt? What kind of paper? It looks like transfer. Stop the machine with the paper half in fuser and half before. What is the result? Set your thickness up to a higher setting and check result.

            Comment

            Previous template Next
            Working...