PDA

View Full Version : Cleaning unit for fixer on konica 8050


Custom Search


mcbrides printing
04-16-2010, 03:12 PM
I am getting a message on panel that says Exchange Cleaning Unit for fixer. I looked it up in the manual. It does not look difficult to exchange, call service. It normally takes at least 4 days to get a service rep for a minimum for $ 200, and then they order parts and come back in a couple of days. Since the machine is telling me what is wrong, can I order the part and call service or replace myself. What is involved and how difficult is it.
John

laserman06
04-17-2010, 05:27 AM
Just sent you a PM.

RRodgers
04-17-2010, 09:05 AM
It's very simple to change out. JUST BE SURE TO ZERO OUT THE COUNTER!!!!

mcbrides printing
04-17-2010, 04:00 PM
Thanks for the info. After it got a couple of plastic plates jammed and warped, I pulled the the cleaning unit out. It looks like it has only a month left of material on the roll. I zeroed out the counter and ordered a new unit for less than a service call. I do not mind calling service, but this was to simple.

John

anothertech
04-17-2010, 05:15 PM
I don't know if anyone else does this, I run all of the machines I take care of without the web assy. I've been doing it for a long time and it works great. I have not seen any negative effects.

RRodgers
04-17-2010, 07:53 PM
One thing I always do is put a little oil on the brake. I find that they lock up about half way threw there life.

deep
04-17-2010, 08:07 PM
Yes, we remove the web assy' and the service life of the UHR being upped 20%.

Custom Search