User Profile

anothertech · 2025-07-02T00:40:36+00:00

Hey, I thought you were going to swap it with the other one to troubleshoot?...

anothertech · 2025-06-30T21:48:15+00:00

Yes, that's it....

anothertech · 2025-06-30T15:55:14+00:00

Try swapping the mirror motor with one of the other mirror motors, if they are the same part number. Got to go down through the top to get at them.

anothertech · 2025-06-30T01:15:20+00:00

Check fuse FU3 on PSU2. If it's ok, check the fuses on each power supply....

anothertech · 2025-06-20T01:44:30+00:00

Was the black PCDU removed when the transfer roller handle was still up?

anothertech · 2025-06-19T23:04:59+00:00

I hope they updated the firmware, should be the first thing to do with any strange problem....

anothertech · 2025-06-15T02:58:36+00:00

Check the following inputs. 1 indicates that the sensor is blocked. If the tray is in the up position, these should be zero.

6-161-065 Shift...

Profile Sidebar