Minolta di 200 copier says "close section properly"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nanc512
    #1

    Minolta di 200 copier says "close section properly"

    We have an old Minolta di 200 copier. We don't make many copies and it has been great until today. We moved it, it's on a metal cabinet. Nothing happened during the move. I turned it on today and got the "close section properly" for R2. I haven't had that before, I get that message frequently about the part on the top where you do the auto document feed. I opened R1, have to do that to get to R2. Then I opened R2 and shut both of them. I have done this many times, shut the machine off and on and it's still showing the message.

    I have no clue what to do and was hoping to get some ideas.

    Thank you!

    Nan
    Tags: 200, auto, before, cabinet, close, copier, copies, document, feed, message, metal, minolta, off, old, part, section, showing, shut, time, top
    • fixthecopier
      ALIEN OVERLORD

      2,500+ Posts
      • Apr 2008
      • 4714
      #2
      Does it have an inset sorter, people leave that door open all the time.
      The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

        Comment

        • joesf
          Technician
          • Apr 2010
          • 22
          #3
          there is a magnetic switch on the feeder, it probably bumped out of adjustment in the move. Re-align the feeder and you should be good as gold.

            Comment

            Previous template Next
            Working...