KonicaMinolta Bizhub-350 with Faxkit FK-503, dial problems.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor
    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3237
    #1

    KonicaMinolta Bizhub-350 with Faxkit FK-503, dial problems.

    Installed a FK-503 faxkit in a BH350. Machine dials a number but somehow the PBX can't handle the dialing. During dialing it gives suddenly the busy tone. However when using the On-Hook-Dial dialing goes through and everything is OK.

    Question: Could it be that automatic dialing goes too "fast" for the PBX? Can this somewhere be adjusted in the softswitch settings?

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "
    Tags: 20i, 350, 503, adjusted, automa, automatic, bh350, bizhub, copy, dial, dialing, dials, every, fast, fk-503, google, installed, konicaminolta, number, one, pbx, problems, search, set, settings, softswitch, stalled, switch
    • Karelkat
      Technician
      • Jul 2010
      • 18
      #2
      Try soft swich 512 bit 7 0

        Comment

        • RRodgers
          Service Manager
          1,000+ Posts
          • Jun 2009
          • 1950
          #3
          Sure it's in US and not JP? I see that A LOT!
          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

            Comment

            • Hansoon
              Field Supervisor
              Site Contributor
              2,500+ Posts
              • Sep 2007
              • 3237
              #4
              Dial tone is present after 0-PAUSE so that seems OK. The busy tone is not coming directly but after 3-4 of the 6 digits to dial.

              Its working manually when dialing with the ON-Hook feature, but not when setting the original and than entering the tel. number. In that case you can hear in the speaker that it obtains a proper dial tone but within the following dialing sequence it gives suddenly the occupied beeps.

              Sure it's in US and not JP? I see that A LOT!
              Huh?? Its in Germany and the machine is set to the proper region.

              Hans
              " Sent from my Intel 80286 using MS-DOS 2.0 "

                Comment

                • Karelkat
                  Technician
                  • Jul 2010
                  • 18
                  #5
                  soft switch 512 bit 7=0

                    Comment

                    • RRodgers
                      Service Manager
                      1,000+ Posts
                      • Jun 2009
                      • 1950
                      #6
                      Originally posted by Hansoon

                      Huh?? Its in Germany and the machine is set to the proper region.

                      Hans
                      Sorry, thought you were in the US.
                      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                        Comment

                        Previous template Next
                        Working...