Konica Minolta Bizhub C220 and C280

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • The-Peanut
    Trusted Tech
    Site Contributor
    100+ Posts
    • Aug 2006
    • 192
    #1

    Konica Minolta Bizhub C220 and C280

    has any1 come accross the locations of the fuse for the fuser & I.T Belt on the bizhub c220,

    thanks for any info

    John
    Tags: accross, belt, bizhub, bizhub c220, c220, c280, fuse, fuser, konica, konica minolta, life, minolta
    • yousaf
      Technician
      • Jun 2010
      • 43
      #2
      hi
      i dont understand your problem can u explane to me thanks
      bye
      yousaf

        Comment

        • JSC
          Gimp

          500+ Posts
          • Dec 2006
          • 618
          #3
          I thought you could clear them through the service mode like the C452 range of machines?
          The gene pool could use a little chlorine.

            Comment

            • bizhub1
              Trusted Tech

              Site Contributor
              100+ Posts
              • Sep 2008
              • 230
              #4
              JSC is correct, you reset the transfer belt and fuser through service mode,counter,life, new release. Just make sure you have front door open when you reset it.

                Comment

                • The-Peanut
                  Trusted Tech
                  Site Contributor
                  100+ Posts
                  • Aug 2006
                  • 192
                  #5
                  nice 1, thanks for the info, i spent 30 mins stripping a fuser looking for the fuse lol

                  next time i'll look at the service manual first

                    Comment

                    Previous template Next
                    Working...