Hello,
Lexmark MX410 came in for repair and the fuser needed to bereplaced. I have had replaced the fuser with the new one, reset it and this...
500 results in 0.1623 seconds.
-
Lexmark MX410 slowing down in print speed after 3 pages
-
HP M476. Opinion on boot problem
I know this is an older machine but the owner insists on it being fixed. We just put in a fuser for jamming. That worked out, though the machine fuser... -
Laserjet pro M476dwjamming in fuser
Hello, I dont work on many printers, mainly copiers. This printer jams just after the paper enters the fuser. It does just go past the sensor actuator.... -
C4000 SC548 Error Code- Most common causes?
Hi Guys,
I'm dealing with a Ricoh C4000 that has a sporadic SC548 error.
Before I replace the fuser, I wanted to ask- are there... -
C-450i accordian jam at fuser entrance , J-3003 code
This C450i jam at fuser rollers (not turning), no errors message or indication prior to problem. It worked until midday then started showing J-3003 codes... -
Bizhub C250i poor fixing
Machine has 20k in total. First toners inside (OEM of course. Paper came out with clean picture but toner is smearing under the fingers (not fixed).... -
-
Ricoh C3003 fuser and C2503 fuser
I see that the C2003 fuser will work in the C3003 and C3503.
The Fixing film assembly for the C2003 is the same for the C2503.
The... -
ECOSYS P2040dn fuser
Not being a KyoGuy I have two questions about the fuser of the ECOSYS P2040dn.
1) Is it worth the trouble to replace the film only with after... -
Sharp MX-6050V Fuser Gear
Just looking for a 15t/32t fuser gear. Sharp MX-6050V.
NGERH2485FCZZ.Sharp said it was discontinued.Goes on rear of fuser unit.
Does anyone... -
8518 wrinkles
Here's one that might help you not fall down the rabbit hole.
Tech dispatched to a "wrinkles" call on an 8518. on letter, the... -
Kyocera P21235dn jam at rear
Ok so I have a fleet of P2135dn printers they all fail with the same issue I've been unable to solve with a paper jam at rear with a full printed sheet... -
XEROX Docucolor 240 Error code 077-103
Hi,
I know this code means: Fusing Unit Exit Sensor Off Jam
Do you have any idea how to check if the detector is working well or is... -
Printing A3 Full Colour causes paper jam at fuser - mfp e77822
Hi has anyone any tips as to how I can stop my paper jamming when printing A3 full colour? If I don't leave a 10mm white top margin it always jams once... -
i-have-fax-problems started a topic Kyocera P6235cdn problem with Toner residue on lower Fuser rollerin KyoceraKyocera P6235cdn problem with Toner residue on lower Fuser roller
Dear colleagues,
there's a problem with toner residues on the lower fuser roller.
I had this issue with a black/white machine...
