Ok, I'm going to default to my "this machine is doing something weird" fix.
I've seen some really screwball issues caused by the memory...
Rusty.Harris
Rusty.Harris
Senior Tech
Last Activity: 1 day ago
Joined: 01-08-2021
Location: Springfield, MO
-
Yeah, I remember those wedge things on the old machines. I don't see much help in them stacking better either, but I do hear a lot of tech complaining...Leave a comment:
-
20-30-3545 only part
Other than forgetting to pull them off when you attach a bridge unit. What purpose do these serve?
I've never had problems with paper jamming/curling... -
I rank the 20/3040 series almost up there with the 351/451 series LOL, but at least the 20/3040 was a "little" bit easier without the rotating...Leave a comment:
-
HP speed license activation
Does anyone know who came up with the bright idea for the speed up license activation?
Before, once you connected it to the network, it would go... -
Had a chat with my district rep Tuesday morning. He mentioned that this is sort of a "known" issue on LOW volume machine. Also, if the energy...Leave a comment:
-
4518A toner sticking to UFR
OEM supplies, less than 1/2 of the life of the UFR on the copy count. Toner sticking to the UFR. I remember seeing this back in the old 452 style machines... -
Changing the position of the mirrors where they stop under the slit glass. 05-3035, default is 133 I think....Leave a comment:
-
One other thing to check. Image position of the scanner. In the photo below, as the document feeds through the document feeder, the scanner mirrors...Leave a comment:
-
C4B0, 4525 w/finisher, new out of the box
Tech setting one of these up, at power on C4E0 error. We were setting up a batch of machines, swapped fuser. 03 mode for the fuser and it had a slight... -
E-4525 w/MJ1048 & MJ6011
Out of the box new setup. CC61 Checked a few things then took the hole punch out and didn't see anything until I
looked at the connector on the...
No activity results to display
Leave a comment: