Hello,
Lexmark MX410 came in for repair and the fuser needed to bereplaced. I have had replaced the fuser with the new one, reset it and this is what happened. It prints 3 pages, then the fan increases, after that decreases and start printing like a snail. I put the old fuser back and...nothing different from normal.
I connected it to the computer, everything was fine in the wap settings. I launched 5 sheets in a row one-sided, after the third sheet the same thing happened again, then 5 sheets double-sided and than error 230.10 and the very first sheet stopped at the exit sensor at the end of the sheet. The reversing solenoid does not move at all, I changed the reverse rollers from a working MX310. Again the same thing.I also did and :
And the reverse solenoid doesn`tmove , itdoesn't move at all, I wonder what the solenoid might have to do with the speed of printing.
Can anyone help please?
P.S.(quiet mode is
off)
Lexmark MX410 came in for repair and the fuser needed to bereplaced. I have had replaced the fuser with the new one, reset it and this is what happened. It prints 3 pages, then the fan increases, after that decreases and start printing like a snail. I put the old fuser back and...nothing different from normal.
I connected it to the computer, everything was fine in the wap settings. I launched 5 sheets in a row one-sided, after the third sheet the same thing happened again, then 5 sheets double-sided and than error 230.10 and the very first sheet stopped at the exit sensor at the end of the sheet. The reversing solenoid does not move at all, I changed the reverse rollers from a working MX310. Again the same thing.I also did and :
(DUPLEXTESTS >DuplexFeed 1
cCheck the reverse solenoid forproper operation )And the reverse solenoid doesn`tmove , itdoesn't move at all, I wonder what the solenoid might have to do with the speed of printing.
Can anyone help please?
P.S.(quiet mode is
off)
Comment