Bizhub C450

[stevee104]

can not get a equitrac system to work on this machine.have service manuals,owners manuals and even talk to customer service at equitrac
and still no go.we are not a minolta dealer so any help would be
great. thanks steve

[knightfall]

1. Remove the Finisher.
2. Remove the Left side Cover, inside is located a 4 pin connector
3. The correct key counter mounting kit used with the Equitrac key counter devices is (Item #4623481).
4. The correct copier interface cable is included in the kit.

also attached is billing setting to configure you equitrac to c450

good luck