Hello everyone, have a konica c353, took the main board to check the cables to
the bypass clutches, now all four paper trays say refurnish paper, lift motor does
come on, paper tray is detected, but nothing else, was working before. Shorted
the board possibly. Before all this happen, had an error c0211, bypass tray error,
now after removing board cannot detect paper in any tray. Thanks in advance.
the bypass clutches, now all four paper trays say refurnish paper, lift motor does
come on, paper tray is detected, but nothing else, was working before. Shorted
the board possibly. Before all this happen, had an error c0211, bypass tray error,
now after removing board cannot detect paper in any tray. Thanks in advance.
Comment