when i print a image is background ok, but when i make a copy the image is with color background in all area
background color only in copies
Collapse
X
-
Re: background color only in copies
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comComment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: background color only in copies
My equipment is Konica Minolta Bizhub C500, when i make a copy backgroun shadow and image copies is present in all document. I have poor quality of image.
I try follow steps
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [3. Image quality adjustment] key.
3. "Image quality mode menu screen"
Press the [2. Printer gamma adjustment] key.
4. "Printer gamma adjustment menu screen"
Press the [2. Printer gamma sensor adj.] key.
show me...
Error 31: Sensor value abnormality - Re-adjust itComment
-
Re: background color only in copies
What color is the background? How many prints on each developing unit?
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: background color only in copies
The background is not color specific, i make copies in single mode (C Y M Bk) and copies are within background shadow, but with full color background is present.
Only in mode copier is a problem, when i send a print with fiery a print with full color is okComment
-
Re: background color only in copies
Did someone mess with the "Background Adjust" button on the image adjust screen? That would only affect copies and not prints.
Also, clean your optics.' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
Comment