PDA

View Full Version : C654 C754


Custom Search


JSC
01-07-2012, 11:27 PM
Has any one seen or got info on the new colour boxes (bizhub C654 and C754) due out soon?

I hear they run on Linux........:confused:

bizhub1
01-08-2012, 03:47 AM
Heard about them, should see them at the expo in Vegas next week.

EarthKmTech
01-08-2012, 12:46 PM
finally a 75 ppm office colour machine from km, a bit behind the 8 ball. Hopefully its not a lemon like some of their previous machines, otherwise I may have to go postal. :cool:

Mooseface2r
01-09-2012, 08:16 AM
Theres a couple of pages on the konica pages in a PDF if you google it.

rebt101
03-02-2012, 05:20 PM
Does anyone know where I can find the Panel Customization Tool for the C754? I have looked all over MyKonicaMinolta.com

Albonline
03-02-2012, 08:25 PM
have setup 6 of the 654's ,they seem to be pretty solid units , though not tough enough to replace the 601 and the 751 lines as intended.

EarthKmTech
03-02-2012, 11:52 PM
have setup 6 of the 654's ,they seem to be pretty solid units , though not tough enough to replace the 601 and the 751 lines as intended.


Ahh, thats not hard.

I'm sure if the customers using low quality dusty paper the machine wont be dumping developer every 100k nor will it require labor intensive PM calls every 250k.

that old konica engine is a dinosaur and belongs in the past, back when labor was cheap and technicians had nothing to do all day :cool:

RRodgers
03-03-2012, 03:24 AM
Wish I could make the Vegas show but my birthday is on the 9th and I'm putting together the party for it. I'll be 40. Swing by and have a beer if you are local. Free firmware to the first 10 people. :)

Si@danwood
04-04-2012, 03:26 PM
Has any one seen or got info on the new colour boxes (bizhub C654 and C754) due out soon?

I hear they run on Linux........:confused:


You have heard correctly ,am at this moment on the Uk training course and they are running on Linux

JSC
04-04-2012, 03:32 PM
You have heard correctly ,am at this moment on the Uk training course and they are running on Linux
Who's running the course, is it ken?

Si@danwood
04-04-2012, 03:43 PM
Who's running the course, is it ken?


Gary ...

JSC
04-04-2012, 03:59 PM
Gary ...

Never been one one of his courses, Im sure they are all the same though. I find Konica Minolta courses better than Ricoh much friendlier at lest.



Keep filling up with Tea & Coffee. :o

morpk
04-05-2012, 03:13 AM
is this range out for Australia yet ?

oxident
01-14-2013, 08:02 PM
Does anyone know where I can find the Panel Customization Tool for the C754? I have looked all over MyKonicaMinolta.com
Hmm, what kind of tool is this?

Kidaver
01-14-2013, 08:07 PM
I've got the panel customize tool from the c224-c554 class. I would assume they are the same. Send me a pm with an email addy and I'll send it that way. I'm sure it would either recognize the file or not recognize it.

rebt101
01-14-2013, 08:13 PM
I've got the panel customize tool from the c224-c554 class. I would assume they are the same. Send me a pm with an email addy and I'll send it that way. I'm sure it would either recognize the file or not recognize it.

Thanks, I finally got it when I want to C654 class.

oxident
01-15-2013, 07:34 AM
I guess that tool is not public for the C754, is it?

rebt101
01-15-2013, 02:06 PM
I guess that tool is not public for the C754, is it?

I don't know about public, but if you have access to mykonicaminolta.com it is now available under the C754 utilities. If you can't access it let me know and I could send it to you. It is a very small file, only 137k.

oxident
01-20-2013, 02:11 PM
When you write, those machines run on Linux, do you mean the OS on the copier itself?

JR2ALTA
01-20-2013, 05:48 PM
When you write, those machines run on Linux, do you mean the OS on the copier itself?

yes "runs on linux" what does that mean and why should i care? does anybody plan on customizing their copier or some other open source nerdiness?

oxident
01-20-2013, 06:19 PM
Well, if they do run on linux and one is able to gain root access there might be a chance to obtain valueable debug information. There are people who have succeeded in doing this on recent DesignJet printers and it's really far away from being some kind of "nerdiness"...

Custom Search