User Profile
Collapse
-
is the lead edge deletion straight?...👍 1 -
on the i series three places hold counter /life/sn. The id board, the mfp board and ssd. with cpu being assigned to a particular sn....👍 1Leave a comment:
-
yes it works, i have done it . only problem to come in is if doner unit was written off as destroyed. you must do all boards including the id board.👍 1Leave a comment:
-
-
the ones that got hot always failed at a later time. replace it.Leave a comment:
-
i always left them with no format at all, raw. the best clue you gave was its getting hot. how hot? if its burn your fingers hot ,toss it....👍 1Leave a comment:
-
I had to adjust quite a few of these pins on new out of the box units at setup....👍 1Leave a comment:
-
The side door alignment can also cause this issue. try pushing it in some on the first cycle ,see if it makes a difference. Is the door crashing into...Leave a comment:
-
No activity results to display
Show More
Leave a comment: