[Misc] Need part for a Konica/Minolta DF-611 ADF (on C253 K/M), Any Ideas

[Doug James]

Part Number 9J07 R707 00, It is the gear assy and motor in the ADF that raises the paper. Need to find supplier for Konica Bizhub C253 parts. Used or new doesn't matter. Thanks so much

[acusso1234]

Re: Need part for a Konica/Minolta DF-611 ADF (on C253 K/M), Any Ideas

Would You like to explain us what is the matter? Only because KM has posted LOTS OF BULLETTINS (tad) ON THIS (vERY JAMMER ) adf..

[Doug James]

Re: Need part for a Konica/Minolta DF-611 ADF (on C253 K/M), Any Ideas

You bet, The shaft attached to the base of the assembly that holds the upper part of a "pivot assembly" to the lwr frame has broken an the motor is also shot. Tried to fix the shaft be re-enforcing it with a screw and building a better base to the shaft only after re-installing found the motor was shot.

[acusso1234]

Re: Need part for a Konica/Minolta DF-611 ADF (on C253 K/M), Any Ideas

You bet, The shaft attached to the base of the assembly that holds the upper part of a "pivot assembly" to the lwr frame has broken an the motor is also shot. Tried to fix the shaft be re-enforcing it with a screw and building a better base to the shaft only after re-installing found the motor was shot.

Ok, so no chances. Try posting this into the Parts Room....maybe there you can have more attenction at your request..
I do have here an used 611, but is better for you to find a supplier more near than me 1415-a105911.pdf